Site Menu
Latest News

2012

1. We will host a Hospitality Suite during 2012 PES General Meeting in San Diego, CA on July 22 - 26, 2012. Please visit us at Room Elizabeth A at Grand Hyatt San Diego on Monday, July 23 from 7 pm to 10 pm and Tuesday, July 24 from 6 pm to 9 pm.

2. We presented our synchrophasor-based solution, ROSE at FERC Technical Conference on Increasing Real-Time and Day-Ahead Market Efficiency through Improved Software in Washington, D.C. on June 25 - 27, 2012.

3. We presented at Voltage Stability Session and demonstrated ROSE at the North American SynchroPhasor Initiative (NASPI) meeting in Denver, CO on June 5 - 6, 2012.

4. We exhibited at 2012 IEEE PES Transmission & Distribution Conference and Exposition in Orlando, FL on May 7 - 10, 2012.

5. POM User Group meeting and training was held on April 2 – 5, 2012 in Los Angeles, CA. For user presentations and training materials, please contact us.

6. V&R Energy has released a new version, POM Suite 2012. Please contact our Support for download details.

7. We attended the North American SynchroPhasor Initiative (NASPI) meeting in Orlando, FL on February 29 - March 1, 2012.

8. We presented at the 2012 TechAdvantage Conference that was held on March 6 - 9, 2012 at the San Diego Convention Center in San Diego, CA. Our presentation was a part of the session on “Wide-Area Frequency Measuring Networks for Improved Reliability”.

 

AUSTIN, Texas, April 6, 2011 --
/PRNewswire/ -- The Clean Technology and Sustainable Industries Organization (CTSI) and its committee of utility and system integrator technologists from Lockheed Martin, Austin Energy, National Grid, Northeast Utilities and the City of Anaheim would like to recognize the 2011 Top 15 Utility Solutions.
Over 100 companies spanning the clean energy spectrum applied into the annual Utility Technology Challenge competition designed to match promising new technologies with testing, demonstration, and early adoption partners. V&R had emerged as one of the fifteen top organizations with the strongest business plans and most compelling solutions to the real-world customers evaluating them:
Read more: htt

Read more...
Related Links
V&R Energy
UTC Top Utility Solutions 2011



V&R Energy: Advanced Power System Analysis Software

Print | E-mail

 

pom-suite

POM Applications Suite

POM Suite is a comprehensive power systems software package for steady-state, transient and small-signal analysis of the power system networks in Planning, Operations and Real-Time..


Read more...

 


POM - Physical and Operational MarginsPOM-New

 

POM is a fast and highly automated power system analysis application for the steady-state stability analysis, which includes load flow, AC contingency analysis, ..

 

Read more.. 

 


OPM - Optimal Mitigation Measuresopm

 

OPM is a fast, powerful and efficient remedial actions electrical engineering software which allows the user to alliviate post-contingency violations during the massive N-1, N-1-1 and N-2 contingency analysis ...

Read more...

 

BOR  - Boundary of the Operating Region

bor

BOR is an AC analysis tool that provides a boundary-based solution by identifying and graphically representing the region within which the power system operation is secure...

Read more...

 

 

 

 

POM-PS - POM-Project Selection ps

The objective of project selection and prioritization studies is to determine the optimal allocation and timing for the proposed power system reinforcements considering the budgetary constraints, while maintaining an acceptable level of reliability

 

Read more...

 

 


POM-TS - POM-Transient Stability ts


Transient Stability (POM-TS) is a fast and comprehensive dynamic simulation and analysis tool – the execution time for a one second transient stability simulation is approximately six seconds for a 50,000-bus case and 17,000 dynamic models.


Read more...

 

 


FFS - Fast Fault Screening ffs


Fast Fault Screening (FFS) feature of POM-TS quickly scans thousands of the potential transmission fault locations and identifies them for the transient stability studies ..



Read more...

 

BOR-TS - BOR-Transient Stability bor-ts

BOR-TS is a friendly, flexible and easy-to-use power systems software to automatically generate nomograms. While it has all the features and functionality of BOR, BOR-TS allows the user to monitor both transient and steady-state limits

 

Read more...

 

PCM - Potential Cascading Modes pcm

Fully integrated into POM, PCM inherits speed, flexibility and robustness of the POM application. PCM analyzes cascading outages as both the steady-state and transient stability phenomena...

 


Read more...

 


POM-RT - POM-Real Timepom-rt

“Physical and Operational Margins” - Real-Time Version (POM-RT) is a fast and powerful voltage stability, AC contingency analysis, assessment of cascading outages, remedial actions and transient stability solution for the Operations environment..

 

Read more... 

 


ROSE - Region of Stability Existencerose

ROSE, a real-time power system analysis tool, addresses the problem of utilizing the PMU data to increase the situation awareness of the operator and improve stability and reliability of the electric grid. ROSE increases situational awareness of the operators by allowing them to accurately and timely predict steady-state instability in real-time environment and avoid the power blackouts by using the phasor quantities collected by PMUs.

 

Read more

 

Next >
 
What The Users Say

“POM/OPM software is a robust, user-friendly, extremely flexible and fast tool for Operations and Transmission Planning studies, for analyzing and graphically representing power system behavior. At NYPA it is being benchmarked and used as an alternative tool to study maintenance and emergency operating conditions. It can also be used to perform power transfers as well as simultaneous voltage and thermal contingency analysis in a more expedient manner.”

- Liana Hopkins, Senior Planning Engineer, Operations Planning, NYPA. (“EPRI’s Innovators”, 2006).

“The evaluation shows that V&R Energy’s software allows us to do in 20 minutes what normally takes about seven hours with our present system,” observes Paul Dolloff, East Kentucky Power senior engineer. “The software is really fast, so it can perform near real-time analyses and handle a large amount of data.”

Dolloff suggests transmission owners who use similar software could save money. For example, in the event of a problem, the software will let operators know about options that can minimize redispatch, avoid the need to resort to more expensive imports, or maximize import/export capabilities.
“It’s all about having the optimal plan when losing a facility unexpectedly,” he remarks.”

- November 2007 issue of "Rural Electric Magazine" © National Rural Electric Cooperative Association.

“FFS (Fast Fault Screening) is a first of its kind tool in the industry and a powerful one for finding stability problems in large and complex power systems.”

- Sharma Kolluri, Entergy Services.

Copyright © 1997-2012 V&R Energy Systems Research, Inc. All rights reserved.

V&R Energy Systems Research, Inc